Completing the lines not breaking them

Grey BMW M3 Touring in side profile with the Sérac carbon roof box, in a dark studio

Carbon Roof BoxDesigned & Handmade in Estonia

By allocation only€6,800

Free to register. No commitment, unsubscribe any time. Privacy policy

The design

Shaped by air

We started with the shape of the car, not the shape of a roof box. From there, we shaped every surface to follow the roofline and guide airflow smoothly from nose to tail. The result is a long, low profile that sits naturally with the car rather than above it.

The Sérac roof box from the front three-quarter, its tapered nose leading into carbon fibre sides The Sérac roof box in side profile, long and low with recessed mounting points underneath The Sérac roof box from the rear three-quarter, showing the channels that shape the tail

Tapered noseGuides airflow smoothly over and around the front of the box.

Low profileKeeps the box close to the roofline, so the car’s silhouette stays clean.

Channelled tailControls airflow as it leaves the box, reducing turbulence and wind noise.

Macro close-up of the carbon fibre weave along the curved edge of the Sérac roof box, under a deep glossy clear coat

The material

Carbon
for a reason

Once we had the shape, we needed a material that could make it possible. We chose carbon fibre for more than the way it looks. It gives us the stiffness and strength to shape Sérac with the long, low proportions we wanted, without adding unnecessary bulk. That means we can keep the weight down, the structure rigid and the profile clean, while giving the box the kind of refined finish we expect from the cars it belongs on.

Audi RS6 Avant from the front three-quarter with the Sérac carbon roof box, in a dark studio

The fit

Designed to fit
your car

We designed Sérac to work with adjustable roof racks across a wide range of cars. If your car has roof rails and compatible adjustable racks, you can fit Sérac without changing your setup. The mounting system adapts to the rack width, making it easy to integrate with the car you already drive.

Lose the hump

Drag to see what you've been putting up with.

Audi RS6 Avant side profile with the low Sérac roof box
Audi RS6 Avant side profile with a typical plastic roof box
Allocation 01 · November 2026

Join the list for updates from the workshop and first access when it goes live.

Free to register. No commitment, unsubscribe any time. Privacy policy

Specifications

The details

Length
203cm

Skis up to 192 cm

Width
96cm

Room for skis side by side

Height
37cm

30 cm above the roof rack

Weight
12kg

Full carbon fibre shell

Volume
390L

5–7 pairs of skis or 4–6 snowboards, plus boots

Fits adjustable roof racksMounting system and hardware included

View full specifications

Dimensions

Length
203 cm
Width
96 cm
Height
37 cm above the roof, 30 cm above the roof rack
Weight
Approx. 12 kg

Capacity

Volume
390 L
Skis
5–7 pairs, up to 192 cm
Snowboards
4–6 boards
Also fits
Boots, clothing and gear
Maximum load
50 kg

Details

Opening
From the rear
Lock
Key lock, keys included
Mounting
Fits adjustable roof racks.
Sérac mounting system and hardware included.

Current specifications. Final figures will be confirmed before Allocation 01 opens.

Our story

Built for us

We are obsessed with two things: skiing, and the cars we drive.

We've been skiing since we were five and six. We grew up in Estonia, and Estonia has no mountains, so every ski trip started with a long drive. Twenty-five years later, it still does. Only now it's in the cars we care about.

It wasn't until we started taking our own ski trips that we really started to notice the compromise. You choose your car for the way it looks, the presence it has and the way it drives, and then you mount a bulky plastic box on the roof that looks out of place and takes all of that away.

We weren't willing to make that compromise any more.

So we designed the roof box we wanted for our own cars. Low profile, shaped around the roofline and made entirely out of carbon fibre. Getting it right meant doing it ourselves, and that's how we are going to do it. Every Sérac will be built by the two of us, by hand, from the first layer of carbon to the final clear coat.

If you've ever looked back at your car in a resort car park and felt it deserved better, then Sérac was made for you too.

Bren & BrenetFounders, Sérac Aero

Allocation 01 · November 2026

Five boxes
Numbered 001 to 005

Join the list for first access when Allocation 01 opens.

  • First accessAllocation 01 opens in November. For the first 72 hours, Sérac is available exclusively to registered members only.
  • Follow the buildStay close as we take Sérac from final development to the first five boxes. We'll share what we're working on along the way.
  • Fitment checkTell us your car. We'll confirm compatibility before the allocation opens.

Allocation 01€6,800

Including EU delivery and all options.

Free to register. No commitment, unsubscribe any time. Privacy policy

Questions

Will it fit my car?

If your car has roof rails and an adjustable roof rack, you're ready for Sérac. Our mounting system adapts to the rack width, so no special adapters are needed. Tell us your car when you register and we'll confirm the fit before the allocation opens.

How does allocation work?

Allocation 01 is five boxes and opens in November 2026. Registered members receive the exact dates by email, and for the first 72 hours it's open to them only. A box is secured with a 50% deposit, and once all five are reserved, the allocation closes. Everyone on the list is first to hear when the next one opens.

When does it launch?

Allocation 01 opens in November 2026, and we plan to deliver all five boxes before mid-December. Exact delivery dates are confirmed when you reserve.

Where do you deliver?

Delivery is included across the EU. We also ship to the UK, Norway and Switzerland, and other countries on request. For deliveries outside the EU, import duties may apply. Every box is fully insured and packed to protect the finish, and you're welcome to collect yours from our workshop in Estonia.

What's included?

Everything is included in the €6,800 price, including delivery within the EU. Every Sérac is built to order: you choose forged or twill carbon, a gloss or matte finish and an engraving. Each box comes with our mounting system, all fitting hardware and keys, and carries its own build number.

Is registering a commitment?

No. Registering is free and doesn't commit you to anything. You only pay if you decide to reserve a box.

Still have a question?

Write to us directly and we'll get back to you as soon as possible.

hello@seracaero.com

Completing
the lines

Allocation 01. Five boxes. November 2026.

Free to register. No commitment, unsubscribe any time. Privacy policy

Get first access

Registered members get 72 hours of first access to every allocation. Allocation 01 opens in November 2026, with five boxes built by hand.

Free to register. No commitment, unsubscribe any time. Privacy policy

You're registered

Tell us a little about your car and how you'd use Sérac.

Include the model and year. We'll email you to confirm whether Sérac fits.
How would you use Sérac? Pick all that apply
When would you want yours?
Where did you hear about us?

Thank you

You're on the list. We'll keep you updated from the workshop and let you know before Allocation 01 opens.